DIY Drop Cloth Bed Skirt
I am all about keeping things simple, cheap and easy.
> Nail Gun > Tape Measure > Scissors > 1-2 Bottles of bleach > 1 Drop cloth 12 ft x 15 ft.
Supplies Needed
1
Measure out the length and width of the bed. I stretched out the cloth to the end of the box spring and then doubled the length (folded it back over) since I knew I would be giving it a pleat.
2
After I cut my pieces, I used the bleach to make the drop cloth whiter. I soaked them all day.
3
I ran the drop cloths through a normal wash cycle 2 times, then dried them.
4
Once I had the pieces laid out on the box spring I was able to fold over little bits of fabric to form a pleat.
5
Once I had the pleats the way I liked them I began using the nail gun.
6
Once the length of the skirt was done I moved on to the skirt portion that would be covering the foot of the bed.
7
